Titanium Processing Center

Grades

We carry a complete range of Domestic Commercial Pure Grade 2 and 6AL-4V
Grade 5 Titanium with full mill traceability.

Commerically Pure Titanium

» ASTM GRADE 1: Unalloyed Ti 35A

» ASTM GRADE 2: Unalloyed Ti 50A

» ASTM GRADE 3: Unalloyed Ti 65A

» ASTM GRADE 4: Unalloyed Ti 80A

» ASTM GRADE 7: Unalloyed Ti-0.15Pd


Alpha-Beta Alloy Titanium

» ASTM GRADE 5: 6AL-4V

» ASTM GRADE 23: 6AL-4V EL

» ASTM GRADE 12: Ti0.3Mo0.8Ni


Other

» Zirconum

COMMERCIALLY PURE TITANIUM GRADE 7: Ti-0.15Pd
Chemical Composition (%)
(Max. values unless range is shown)		 0.08 C; 0.30 FE*, 0.03 N; 0.2 Pd; 0.020 O
0.015 H (sheet); 0.0125H (bar)
MILL ANNEALED
TENSILE PROPERTIES		 Guar. R.T. Min. Typical Elev. Temp. Prop.
600 F 800 F 1000 F
Ultimate Strength (psi) 50,000 30,000 26,000 19,000
Yield Strength (psi)0.2% offset 40,000 18,000 15,000 11,000
Elongation in 2" (%)
Sheet > 0.025 thick		 20 37 25 32
Reduction in Area (%) Bar 25 70/80 70/80 70/80
MECHANICAL PROPERTIES *Also available with 0.05 max FE for superior corrosion resistance.
Stress Rupture
in Time Shown		 Stress (psi)
Time (Hrs.)
Stress and Time
to Produce Elongation
Shown (Creep)		 Stress (psi)
Time (Hrs.)
Creep (%)
Charpy V-Notch Impact (ft.-lbs.) at Room Temperature
Bend Radius Under 0.070" thick 2.0 X Thickness
0.070" And Over 2.5 X Thickness
Welded Bend Radius 2.0 - 3.0 X Thickness
Hardness RΒ80
PHYSICAL PROPERTIES
Beta Transus (F ± 25) 1675
Coefficient of Thermal Expansion (10-6in./in./F) 32-212 4.8
32-600 5.1
32-1000 5.4
32-1200 5.6
32-1500 5.6
Density (lbs./cu. in.) 0.163
Melting Point, Approx (F) 3020
Electrical Resistivity at Room Temp. (Microhms cm) 56
Modulus Elasticity - Tension (106 psi) 14.9
Modulus Elasticity - Torsion (106 psi) 6.5
Thermal Conductivity
(Btu/hr/sq. ft./F/ft.)		 9.5 at Room Temperature
Specific Heat (Btu/lb./F) at Room Temp. 0.124
Weldability Good
Annealing Temp. (F) Full 1300°/30 Min. - 2 Hrs,; Air Cool
Stress Relief 1000-1100°/30 Min.; Air Cool
Forging* Temp. (F) Blocking 1600-1700°
Finishing 1500-1600°
Available Mill Products Bar, Billet, Extrusions, Plate Sheet, Strip, Wire, Pipe, Tubing
Typical Application For corrosion resistance in the chemical industry where media is mildly reducing or varies between oxidizing and reducing.
Industry Specifications ASTM
  • B265 Grade 7
  • B348 Grade 7
  • F337 Grade 7
  • F338 Grade 7
  • F467 Grade 7
  • F468 Grade 7

« Back to Titanium Grades
« Back to Titanium Processing Center home page