Titanium Processing Center

Grades

We carry a complete range of Domestic Commercial Pure Grade 2 and 6AL-4V
Grade 5 Titanium with full mill traceability.

Commerically Pure Titanium

» ASTM GRADE 1: Unalloyed Ti 35A

» ASTM GRADE 2: Unalloyed Ti 50A

» ASTM GRADE 3: Unalloyed Ti 65A

» ASTM GRADE 4: Unalloyed Ti 80A

» ASTM GRADE 7: Unalloyed Ti-0.15Pd


Alpha-Beta Alloy Titanium

» ASTM GRADE 5: 6AL-4V

» ASTM GRADE 23: 6AL-4V EL

» ASTM GRADE 12: Ti0.3Mo0.8Ni


Other

» Zirconum

COMMERCIALLY PURE TITANIUM GRADE 3: Unalloyed Ti ("Pure") 65A
Chemical Composition (%)
(Max. values unless range is shown)		 0.08 C; 0.25 FE*, 0.05 N; 0.30 O; 0.015 H
(sheet; 0.0125H (bar); 0.00100 H (billet)
MILL ANNEALED
TENSILE PROPERTIES		 Guar. R.T. Min. Typical Elev. Temp. Prop.
600 F 800 F 1000 F
Ultimate Strength (psi) 65,000 32,000 29,000 22,000
Yield Strength (psi)0.2% offset 55,000 20,000 17,000 13,000
Elongation in 2" (%)
Sheet > 0.025 thick		 18 35 18 33
Reduction in Area (%) Bar 30 70/80 70/80 70/80
TITANIUM MECHANICAL PROPERTIES *Also available with 0.05 max FE for superior corrosion resistance.
Stress Rupture
in Time Shown		 Stress (psi)   20,000  
Time (Hrs.)   100  
Stress and Time
to Produce Elongation
Shown (Creep)		 Stress (psi)
Time (Hrs.)
Creep (%)
Charpy V-Notch Impact (ft.-lbs.) at Room Temperature 20-40
Bend Radius Under 0.070" thick 2.0 X Thickness
0.070" And Over 2.5 X Thickness
Welded Bend Radius 2.0 - 3.0 X Thickness
Hardness RΒ90
TITANIUM PHYSICAL PROPERTIES
Beta Transus (F ± 25) 1690
Coefficient of Thermal Expansion (10-6in./in./F) 32-212 4.8
32-600 5.1
32-1000 5.4
32-1200 5.6
32-1500 5.6
Density (lbs./cu. in.) 0.163
Melting Point, Approx (F) 3020
Electrical Resistivity at Room Temp. (Microhms cm) 56
Modulus Elasticity - Tension (106 psi) 15.0
Modulus Elasticity - Torsion (106 psi) 6.5
Thermal Conductivity
(Btu/hr/sq. ft./F/ft.)		 9.5 at Room Temperature
Specific Heat (Btu/lb./F) at Room Temp. 0.124
Weldability Good
Annealing Temp. (F) Full 1300°/30 Min. - 2 Hrs,; Air Cool
Stress Relief 1000-1100°/30 Min.; Air Cool
Forging* Temp. (F) Blocking 1600-1700°
Finishing 1500-1600°
Available Mill Products Bar, Billet, Extrusions, Plate Sheet, Strip, Wire, Pipe, Tubing
Typical Application For corrosion resistance in the chemical and marine industries;for aircraft construction.
Industry Specifications ASTM
  • B265 Grade 3
  • B348 Grade 3
  • B337 Grade 3
  • B338 Grade 3
  • F67 Grade 3

« Back to Titanium Grades
« Back to Titanium Processing Center home page